Categories Robot

Why Is My Litter Robot Blinking Blue Light? (Best solution)

You’ll most commonly notice a flashing or blinking blue light on your Litter-Robot control panel. This blue light is called the Drawer Full Indicator, which means that the waste drawer is full (or approaching full) and needs to be emptied.

How do you fix a blinking blue light on Litter-Robot?

If the unit continues blinking blue, remove the waste drawer and press cycle. Press reset 2x to abort the cycle and return the unit to home (it will level the litter). If the unit goes to solid blue with the waste drawer removed, ensure there is nothing in the drawer blocking the lenses.

How do you turn off the blue light in Litter-Robot?

To turn the Night Light function off, press and hold the Power button for about 5 seconds. The Night Light will come on, then turn off.

Why is my litter-robot light always on?

When the 8-hour period has expired, the unit will run a Clean Cycle. Once the Globe has returned to Home position, only the blue light will be on. When the 8-hour sleep period begins again automatically, both the yellow and blue lights will be on again.

You might be interested:  What Happened To The Robot From Lost In Space? (Correct answer)

What does flashing blue light mean on Roomba?

b) A flashing blue magnifying glass usually means that Roomba has detected extra dirt. c) A solid blue magnifying glass means that Roomba is in intensive clean mode.

Where is the Litter-Robot Sensor?

The Litter-Robot is equipped with infrared emitters and sensors located above the Waste Drawer that check if the drawer is full each time the Globe returns to the Home position.

What does flashing yellow light mean on Litter-Robot?

When the yellow light is on, the Litter-Robot is cycling. When the yellow light is flashing once per second, it will mean one of two things: (1) The cycle was interrupted by the cat sensor. Fifteen seconds after your cat has left the globe, the unit will resume cycling. (2) The bonnet has been removed.

What does cat sensor fault mean on Litter-Robot?

Sometimes after adding litter or replacing litter in the globe, the total weight of the globe becomes high enough that during the rotation or even while stationary (without cat inside) the cat sensor is triggered. If the Cat Sensor is triggered continuously for more than 2 minutes then the red light starts to blink.

How long is Litter-Robot warranty?

The Litter-Robot is backed by an 18-Month Full Warranty and you have the option to extend it for another 18 months for three years of coverage. During the warranty period, AutoPets will repair your Litter-Robot (and even cover shipping costs within the continental United States).

How do you reset a cat’s sensor?

To reset the Cat Sensor, press Reset when the unit is at the Home position and the control panel displays a solid blue light. Press the Reset button firmly and quickly, then watch for the blue light to flash to confirm you have successfully reset the Cat Sensor.

You might be interested:  4. What Was The Cost To Lease Per Month And The Cost Of Buying An Asimo Robot? (TOP 5 Tips)

How do I get the litter robot back online?

Information

  1. Open the app and delete the current unit, even if it is offline.
  2. Force close (swipe away) the Litter-Robot app.
  3. Unplug the Litter-Robot from the back of the unit for at least 1 minute.
  4. Plug the unit back in and allow to cycle fully.
  5. Once the unit has reached a solid blue light ready status, open the app.

How do you manually cycle a litter robot?

Cycle Button + [8 Hour Sleep Mode] Press and Release: Pressing the Cycle Button starts the Litter-Robot cleaning cycle. In order to pause the cycle, press any button on the Control Panel during the Clean Cycle. Press Cycle once again to resume the cleaning cycle.

How do you reset the Litter Robot app?

Please follow the steps below.

  1. Open your app.
  2. Go to “Remote” and click “Delete my Litter-Robot.”
  3. Completely close the Litter-Robot app.
  4. Reset your Litter-Robot by unplugging it from the base while the unit is powered on.
  5. Wait 15 seconds, plug it back in, and allow it to cycle until the blue “Ready” status lights up.
1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *