Categories Robot

Why Is My Litter-robot Blinking Blue Light? (Correct answer)

Is the blue light blinking on your Litter-Robot 3? If you’re wondering what the blue flashing light means, it means your drawer is full and needs to be changed. After the waste drawer has been emptied and replaced, press the reset button on your unit. Now, press the Cycle button to start a clean cycle.

How do you fix a blinking blue light on Litter-Robot?

If the unit continues blinking blue, remove the waste drawer and press cycle. Press reset 2x to abort the cycle and return the unit to home (it will level the litter). If the unit goes to solid blue with the waste drawer removed, ensure there is nothing in the drawer blocking the lenses.

Why is the blue light flashing on my litter-robot?

You’ll most commonly notice a flashing or blinking blue light on your Litter-Robot control panel. This blue light is called the Drawer Full Indicator, which means that the waste drawer is full (or approaching full) and needs to be emptied.

You might be interested:  What Is The Most Advanced Robot? (TOP 5 Tips)

How do you turn off the blue light in Litter-Robot?

To turn the Night Light function off, press and hold the Power button for about 5 seconds. The Night Light will come on, then turn off.

Where is the Litter-Robot Sensor?

The Litter-Robot is equipped with infrared emitters and sensors located above the Waste Drawer that check if the drawer is full each time the Globe returns to the Home position.

How long is Litter-Robot warranty?

The Litter-Robot is backed by an 18-Month Full Warranty and you have the option to extend it for another 18 months for three years of coverage. During the warranty period, AutoPets will repair your Litter-Robot (and even cover shipping costs within the continental United States).

What does cat sensor fault mean on Litter Robot?

Sometimes after adding litter or replacing litter in the globe, the total weight of the globe becomes high enough that during the rotation or even while stationary (without cat inside) the cat sensor is triggered. If the Cat Sensor is triggered continuously for more than 2 minutes then the red light starts to blink.

How do you reset the WIFI on Litter Robot 3?

Perform a hard reset on your Litter-Robot: Unplug the unit from the back of the base, wait 1 minute, then plug it back in and allow it to cycle.

What does flashing yellow light mean on Litter-Robot?

When the yellow light is on, the Litter-Robot is cycling. When the yellow light is flashing once per second, it will mean one of two things: (1) The cycle was interrupted by the cat sensor. Fifteen seconds after your cat has left the globe, the unit will resume cycling. (2) The bonnet has been removed.

You might be interested:  What Is Mr Robot Based On? (Solved)

What is cat sensor timing?

The Cat Sensor is a weight-sensitive switch that measures the weight of the unit, so it can tell when there’s a change and what that change means. Each time the unit is powered on and at the end of each Clean cycle, the Cat Sensor measures the weight of the unit.

How do I get the litter-robot back online?

Information

  1. Open the app and delete the current unit, even if it is offline.
  2. Force close (swipe away) the Litter-Robot app.
  3. Unplug the Litter-Robot from the back of the unit for at least 1 minute.
  4. Plug the unit back in and allow to cycle fully.
  5. Once the unit has reached a solid blue light ready status, open the app.

Can you reset litter-robot from app?

Open your app. Go to “Remote” and click “Delete my Litter-Robot.” Reset your Litter-Robot by unplugging it from the base while the unit is powered on. Wait 15 seconds, plug it back in, and allow it to cycle until the blue “Ready” status lights up.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *